NEWS

Structure and specifications of wire-wound hose

Time：

2024-05-30 10:21

Source:

Product Structure:
 Mainly consists of liquid-resistant inner rubber layer, middle rubber layer, 24 or 6 layers of steel wire winding reinforcement layer, outer rubber layer, the inner rubber layer has to make the conveying medium to withstand the pressure, to protect the steel wire from the erosion of the role of the outer rubber layer to protect the steel wire from damage, the steel wire (φ0.3-2.0 reinforced steel wire) layer is the backbone material to play a role in reinforcing.
 Product use:
 High-pressure steel wire reinforced hydraulic hose is mainly used for mine hydraulic support, oilfield mining, suitable for engineering and construction, lifting and transportation, metallurgy, forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and various industrial sectors mechanization, automation of the hydraulic system to transport a certain pressure (higher pressure) and temperature of petroleum-based (such as mineral oil, soluble oil, hydraulic oil, fuel, lubricants) and water-based liquids (such as emulsions). Water-based liquids (such as emulsions, oil-water emulsions, water) and other liquid transmission, high resistance to working pressure up to 70-100MPa. Note: steel wire-wound hose standards refer to GB/T10544-03 standards, DIN20023, SAE100R9-13 standards
 Working temperature: -40～+120℃.
 Specification range: 6mm-152mm1.
 Hose features:
 1. The hose is made of special synthetic rubber with excellent oil resistance, heat resistance and aging resistance.
 2. The hose has high bearing pressure and superior pulse performance.
 3. The hose body is tightly combined, soft, small deformation under pressure, long service life.
 4. The hose has excellent resistance to winding and fatigue.
 5. The length of steel wire-wound hose is 50 meters for φ16 and 40 meters for φ19 and above.

Previous

High-pressure steel wire braided hose production process

What is the difference between mining high pressure oil hose and engineering hose?

Next

RELATED NEWS

Metal hose selection of the five elements know how much

size of the nominal diameter of the hose, Xingda told us to choose the connector type (mainly flange connection, threaded connection, quick coupling connection) and the size of the metal hose, hose length.

Industrial hose, rubber hose how to identify good and bad?

Rubber hose is divided into two kinds of high-pressure hose and low-pressure hose, high-pressure hose is generally composed of four parts: outer rubber layer, steel wire reinforcement layer, middle rubber layer and inner rubber layer. The inner rubber layer of the hose is in direct contact with the hydraulic oil, generally made of synthetic rubber. The bearing capacity of the hose depends on the strengthening layer, the layer is the skeleton of the hose, usually made of steel wire braid or winding. Most of the high-pressure steel wire braid for the skeleton, high-pressure, high-pressure steel wire winding skeleton. The outer rubber layer of the hose is generally made of wear-resistant, corrosion-resistant rubber to ensure that the reinforcing layer is not subject to mechanical damage, chemical corrosion, moisture rust, low-pressure hose to braided cotton, hemp wire instead of braided steel wire, generally used for low-pressure oil return pipeline.

What are the applications of high pressure cleaning hose?

Various specifications of water and sewage pipelines, high-pressure cleaning tube industrial water pipelines, industrial and industrial and mining enterprises and residential sewage pipes, defeat, rainwater pipes, gas pipes, municipal pipelines, flue, oil pipelines and two-phase flow pipeline clogging;