Industrial hose, rubber hose how to identify good and bad?

2024-05-30

Rubber hose is divided into two kinds of high-pressure hose and low-pressure hose, high-pressure hose is generally composed of four parts: outer rubber layer, steel wire reinforcement layer, middle rubber layer and inner rubber layer. The inner rubber layer of the hose is in direct contact with the hydraulic oil, generally made of synthetic rubber. The bearing capacity of the hose depends on the strengthening layer, the layer is the skeleton of the hose, usually made of steel wire braid or winding. Most of the high-pressure steel wire braid for the skeleton, high-pressure, high-pressure steel wire winding skeleton. The outer rubber layer of the hose is generally made of wear-resistant, corrosion-resistant rubber to ensure that the reinforcing layer is not subject to mechanical damage, chemical corrosion, moisture rust, low-pressure hose to braided cotton, hemp wire instead of braided steel wire, generally used for low-pressure oil return pipeline.

What are the applications of high pressure cleaning hose?

2024-05-30

Various specifications of water and sewage pipelines, high-pressure cleaning tube industrial water pipelines, industrial and industrial and mining enterprises and residential sewage pipes, defeat, rainwater pipes, gas pipes, municipal pipelines, flue, oil pipelines and two-phase flow pipeline clogging;

Introduction of High Pressure Cleaning Hose

2024-05-30

High-pressure cleaning tube technology is in recent years the development of a very rapid development of a new necessary technology, it is the use of high-pressure water generating equipment to produce high-pressure water, through the nozzle high-pressure cleaning tube will be transformed into a high degree of pressure to gather water jets moving, can complete the cleaning, cutting, crushing, and other various processes of technology.

What are the main materials used in high pressure hose?

2024-05-30

The materials used in high-pressure hose are divided into non-metallic and metallic materials, and the non-metallic materials often used in the production process of high-pressure hose are butyl rubber, styrene-butadiene rubber, chloroprene rubber, etc. With the advancement of technology and the development of the rubber industry. EPDM rubber, chlorosulphonated polyethylene, chloroether rubber, hydrogenated butyl rubber, etc. are gradually applied to high-pressure hose manufacturers products. Used to manufacture high-performance, high value-added high-pressure hose products. Non-metallic reinforcing materials are nylon, polycool fibers, with the development of the textile industry, aramid fibers and other high-performance materials are gradually applied to high-pressure hoses. Metallic materials have a round cross-section of copper-plated steel wire, galvanized steel wire for the skeleton layer materials, with computer simulation, testing and other technological advances, flat steel wire (cross-section of oval copper-plated steel wire) will be used in high-pressure hose. New materials used in high-pressure hose:

The application of high-pressure hose and the important factors affecting the life span

2024-05-30

temperature, high pressure hose in the use of high ambient temperatures when the service life is short, for this reason to be as far as possible from the heat source, if necessary, can be used to armored hose or installation of heat shielding plate, in order to avoid high temperatures in the case of heat deterioration of the hose.

High-pressure steel wire braided hose production process

2024-05-30

with the mixer according to the formula mixing out of the inner layer of rubber, the middle layer of rubber and outer layer of rubber; with the extruder to extrude the inner layer of tubing, wrapped in the coated with a release agent on the soft core or hard core (liquid nitrogen freezing method can be used without the tube core).

Structure and specifications of wire-wound hose

2024-05-30

Mainly consists of liquid-resistant inner rubber layer, middle rubber layer, 24 or 6 layers of steel wire winding reinforcement layer, outer rubber layer, the inner rubber layer has to make the conveying medium to withstand the pressure, to protect the steel wire from the erosion of the role of the outer rubber layer to protect the steel wire from damage, the steel wire (φ0.3-2.0 reinforced steel wire) layer is the backbone material to play a role in reinforcing.

What is the difference between mining high pressure oil hose and engineering hose?

2024-05-30

Mining high-pressure hose and engineering high-pressure hose is also a high-pressure hose, the essence of the difference is not much, all play the role of oil pressure.

Precautions for Hard Tube Assemblies

2024-05-30

The dimensions of hard tubing are defined by two key dimensions: the outside diameter (O.D.), and the wall thickness. To select the correct size, several factors must be considered: